▲The main material requirements are high-strength aluminum alloy profiles,not less than 6063, and the processing grade reaches T5 standard. The overall fully enclosed design, no sharp angle on the surface, no exposed screws,imported powder coating surface treatment;

▲The inside of the suspension bridge box adopts a gas-electricity separation design to ensure the safety of use: the bottom end of the box must have an oxygen drain hole design to prevent the accumulation of oxygen in the tower and the power line caused by fire accidents.

▲The suspension axle bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.

★ The suspension bridge has a safety load device with a fourfold load factor

1. Working power: AC220V, 50Hz; Input power: 6KVA;

2. Bridge length 2000~3000mm (the actual size is subject to the actual

measurement of the user's site); The thickness of the main profile of the bridge body ≥ 18mm, in order to ensure the load-bearing strength of the product, the thickness of the bridge body hanging pipe connection ≥ 34mm;

3. Equipped with ambient lighting * 2pcs, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, lamp head diameter ≤ 20cm, illuminance ≥ 35000LUX;

4. Wet section tower: 1pc, using imported linear guide rail, the center distance between the two tracks is 190mm, the overall length of the slide rail is ≥600mm, and the tower body can move left and right ≥ 500mm.

5. Wet section box rotation ≥ 340º, damping brake brake; Height ≥ 900mm, trapezoidal box without angular design (length 36CM x width 21CM), the left and right sides of the box with a stainless steel infusion pump bracket, syringe pump frame upper and lower fixture device, the upper section is four sections of pagoda shape, the lower section is a spiral fixed structure.

6. The center distance between the infusion pump brackets on both sides is ≥ 450mm, the length of the infusion pump bracket is ≥830mm, and the diameter of the infusion pump bracket is ≥ 25mm; Can hang ≥ 6 infusion pump syringe pump of different specifications; Equipped with a rotatable extension infusion rack*1 set, swivel arm ≥ 350mm.

7. Instrument platform: 2 layers (bearing weight≥ 50Kg, height adjustable);

8. The pallet fixing method adopts reinforced aluminum alloy tripod support, the tripod length ≥ 120mm, width ≥ 40mm, thickness ≥ 8mm, the center distance of the tripod fixed slide rail on both sides is ≥ 134mm, the length of the pallet including side rail is ≥ 515mm, the length of the side rail is not included≥ 455mm, the width ≥ is 400mm, the thickness ≥ is 25mm, the stainless steel side rail on both sides is ≥ 350mm, the width ≥ 10mm, the height ≥ 20mm, optional hanging net basket, etc.;

9. Drawer: 1pc, carrying weight≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;

▲Gas terminal standard configuration: oxygen * 1pc, compressed air * 1pc, negative pressure suction * 1pc; Optional negative pressure suction device, and oxygen inhaler;

1. Power sockets: 6pcs, 220V, 10A (compatible with international plugs);

2. Grounding terminal: 2pcs; Network interface: RJ45, 1pcs; Net load of wet section tower: 70~150kg;

3. Trunk section tower: frame structure design, 1 pc; It adopts imported linear guide rail, the distance between the two tracks is 190mm, the overall length of the slide rail is: 600mm, and the left and right moving distance is 500mm.

4. The length of the beam of the frame box is 650mm, the width of the beam is 165mm, and the height of the beam is 110mm; The oval profile support frame on both sides of the built-in power supply is 120mm long, 53mm wide and 860mm high. The inner diameter of the pallet slide is 70mm, and the distance between the two frames is 440mm.

5. Instrument platform: 2 layers (carrying capacity≥ 50Kg, height adjustable)

6. Drawer: 1pcs, carrying capacity≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;

▲ Gas terminal standard configuration (installed on the bridge): oxygen * 1pc, negative pressure suction * 1pc;

▲Each set is equipped with power sockets: each side of the frame has a power supply*3 pcs, a total of 6 (compatible with national, American and British standards)

▲Grounding terminal *2pcs; Ceiling mounting, stable and secure.