▲The main material requirements are high-strength aluminum alloy profiles,not less than 6063, and the processing grade reaches T5 standard. The overall fully enclosed design, no sharp angle on the surface, no exposed screws,imported powder coating surface treatment;

▲The horizontal cross arm of the suspension bridge has a safety bearing device,and the suspension bridge has a central shaft rotation device.

▲The suspension axle bearing adopts needle roller type, and the number of rotations is not less than 100,000 times.

★ The suspension bridge has a safety load device with a fourfold load factor

1. Working power: AC220V, 50Hz; Input power: 6KVA;The length of the bridge is 2000~3000mm (the actual size is subject to the

actual measurement of the user's site); The thickness of the main profile of the bridge body ≥ 18mm, in order to ensure the load-bearing strength of the product, the thickness of the bridge body hanging pipe connection ≥ 34mm;

2. Equipped with ambient lighting * 2pcs, optional LED auxiliary lighting with independent suspension arm system, the number of LED lamp beads ≥ 28, the diameter of the lamp head is ≤ 20cm, and the illuminance ≥ 35000LUX;

3. Wet section tower: 1pc, using imported linear guide rail, the center distance between the two tracks is 190mm, the overall length of the slide rail is ≥600mm, and the tower body can move left and right ≥ 500mm.

4. The wet section tower box rotates ≥ 340º, damping brake brake; Height ≥ 900mm, trapezoidal box without angular design (length 36CM x width 21CM), the left and right sides of the box with a stainless steel infusion pump bracket, syringe pump frame upper and lower fixture device, the upper section is four sections of pagoda shape, the lower section is a spiral fixed structure.

5. The center distance of the infusion pump bracket on both sides is ≥ 450mm, the length of the infusion pump bracket is ≥ 830mm, and the diameter of the infusion pump bracket is ≥ 25mm; Can hang ≥ 6 infusion pump syringe pump of different specifications; Equipped with 1 set of rotatable extension infusion stand, swivel arm ≥ 350mm.

Instrument platform: 2 layers (carrying weight≥ 50Kg, height adjustable);

6. The pallet fixing method adopts reinforced aluminum alloy tripod support, the tripod length ≥ 120mm, width ≥ 40mm, thickness ≥ 8mm, the center distance of the fixed slide rail on both sides is ≥ 134mm, the length of the pallet including side rail is ≥515mm, the length of the side rail is not included≥ 455mm, the width ≥ is 400mm, the thickness ≥ 25mm, the stainless steel side rail on both sides is ≥ 350mm, the width ≥ 10mm, the height ≥ 20mm, optional hanging net basket, etc.;

7. Drawer: 1pc, carrying weight≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;

8. Standard configuration of gas terminal: oxygen * 1pc, compressed air * 1pc, negative pressure suction * 1pc; Optional negative pressure suction device, and oxygen inhaler;

9. Power sockets: 6pcs, 220V, 10A (compatible with international plugs);

10. Grounding terminal: 2pcs; Network interface: RJ45, 1pc;

11 dry section tower: 1pc, using imported linear guide rail, the center distance between the two tracks is 190mm, the overall length of the slide rail is ≥600mm, and the tower body can move left and right ≥ 500mm.

12 trunk tower box rotation ≥ 340º, damping brake brake; Height ≥ 900mm, trapezoidal box without angular design (length 36CM x width 21CM), the left and right sides of the box with a stainless steel infusion pump bracket, syringe pump frame upper and lower fixture device, the upper section is four sections of pagoda shape, the lower section is a spiral fixed structure.

13. The center distance between the infusion pump brackets on both sides is ≥ 450mm, the length of the infusion pump bracket is ≥ 830mm, and the diameter of the infusion pump bracket is ≥ 25mm; Can hang ≥ 6 infusion pump syringe pump of different specifications;

14. Instrument platform: 2 layers (bearing weight≥ 50Kg, height adjustable);

15. Drawer: 1pc, carrying capacity≥ 20Kg. Drawer inner diameter ≥ 320mm, width ≥ 240mm, height ≥ 120mm, pull-out length ≥ 20mm; Drawer outer diameter size≥ length 430mm, width ≥ 300mm, height ≥ 160mm; Drawer with automatic suction design;

16. Standard configuration of gas terminal: oxygen * 1pc, negative pressure suction * 1pc;

17. Each set of configuration power sockets≥ 6 (compatible with national, American and British standards);

18 grounding terminals * 2pcs; Network interface *1pc; Configurations can be upgraded according to customer requirements. Ceiling mounting, stable and secure.